Faire Preise - schnelle und zuverlässige Lieferung überall in Europa, - jetzt bestellen!

ABB BOSCH Kaiser Legrand
Protec Class Busch-Jaeger Wago Wise Control Inc.

A600 BAR STOCK THERMOWELL WITH THREAD CONNECTION

Abbildung kann vom Original abweichen
Hersteller WISE-CONTROL

Temperature sensors or indicating type temperature gauges are not directly inserted into the process pipe, unless these are used to measure the outside temperature of process pipe, instead, these are used with thermowells. By using thermowells, sensors and gauges will not interfere with the process line operation, and the users are able to perform the maintenance procedure of the process line more easily. A600 series are seamless round bar type thermowell, and does not contain any welded area by processing the internal area of the round bar. It is designed to be installed onto the process line by using screw created on the thermowell, and normally used in the process line where the pressure and the current exist.

* Note. Depending on the material and U-length, the appearance of the connector may change.


Preloader

"

Temperature sensors or indicating type temperature gauges are not directly inserted into the process pipe, unless these are used to measure the outside temperature of process pipe, instead, these are used with thermowells. By using thermowells, sensors and gauges will not interfere with the process line operation, and the users are able to perform the maintenance procedure of the process line more easily. A600 series are seamless round bar type thermowell, and does not contain any welded area by processing the internal area of the round bar. It is designed to be installed onto the process line by using screw created on the thermowell, and normally used in the process line where the pressure and the current exist. * Note. Depending on the material and U-length, the appearance of the connector may change.

Selection of thermowell ■ Material"
In general, the thermowell material chosen for the installation is governed mainly by the corrosion condition the themowell will face. Recommended material for various services are given in the corrosion table. Occasionally, the material consideration is one of strength rather than corrosion. For example, a stainless steel thermowell may be required for a high pressure water service where otherwise a brass thermowell would be satisfactory from a corrosion standpoint.
■ Insertion
The distance from the end of the well to the underside of the thread or other connection means (Designated as "U") is the insertion length.
■ Bore size
Almost any installation uses several type of temperature measuring instruments. The selection of a standard bore diameter can produce extreme flexibility within the plant.
Hersteller Wise Control Inc.

Datenblatt: A600_series.pdf

Alle Funktionen und technischen Daten können ohne Ankündigung geändert werden, Lieferung vorbehaltlich Verfügbarkeit,Korrektur von Irrtümern und Auslassungen vorbehalten.

Es gibt noch keine Rezensionen für dieses Produkt.

Profitieren Sie von unseren Vorzügen

Herzlich Willkommen bei Industry Supply 24

Wir bieten Spitzenqualität und Markenware aus den Bereichen Elektro- und Sensortechnik für den Heim- und Handwerkerbedarf zu attraktiven Preisen!. Sollte Ihr gewünschtes Produkt nicht im unseren Shop zu finden sein, können Sie uns Ihre Anfrage einfach per Email senden. Viel Spaß beim Einkaufen!

Experten Beratung

Telefon:
040 609 448 990
Öffnungszeiten:
Mo. - Fr.
09 Uhr - 12 Uhr
13 Uhr - 17 Uhr
Email:
Diese Webseite verwendet Cookies. Durch die Benutzung dieser Seite stimmen Sie dem zu.